In this video we are showing you how we installed a polished concrete overlay on our office floor. We started the process by grinding the concrete. (not pictured) Once the concrete was clean, we applied 100% solids epoxy to the floor. Then we broadcast sand into the epoxy to give the concrete surface a rough profile.
We mixed the Increte Systems Level top polishable overlay with the Collomix LevMix concrete mixer.
Increte Level Top PC Agg:
Collomix LevMix:
We poured the concrete overlay and then ran a 3/8" guage rake over the floor to apply the material at the correct thickness.
Gauge Rake:
3/8" Gauge Rake cams:
Spiked Roller:
We polished the concrete using our Lavina 25" propane grinder.
For a full list of all of our favorite tools, visit:
Our podcast, Hacking Concrete:
Follow me on Instagram:
Follow me on Twitter:
Follow Landon on Instagram:
Our concrete companies:
Contact me:
Tim Seay
c/o Decorative Concrete of Virginia
14719 Wards Rd.
Lynchburg, VA 24502
...or just DM me on Instagram.
0 Comments